StorCase Technology Fibre-to-SCSI Single RAID - Manual (Page 45)

S10C100 User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 33
6. Enter a name for the partition and press Enter.
Up to 35 characters (any character, including spaces) can be used. If no name is to
be used, just press Enter (a name may be added or changed later).
The Partition LUN screen should now display (Figure 23).
Figure 23: Partition LUN Screen
7. Select the LUN for the partition and press Enter.
The LUN displayed is the suggested default LUN assignment.
If the letters OV appear before a LUN, this indicates that the selection overlaps with
a soft LUN, most likely the controller or SAF-TE Environmental Processor (SEP) LUN.
An array at an overlapped LUN may be created, but it will not be seen by the host
system until the controller is rebooted.
NOTE: Most UNIX, LINUX, and Macintosh operating systems require the controller LUN to
be a higher value than all array LUNs. Before creating the first array, change the
controller LUN to a higher value or choose NONE (best option) if not using CAPI to
manage the arrays. This allows the first array to be seen at LUN 0.
The system will now confirm the change.
8. Select Yes and press Enter.