Configuring the battery, Enabling/disabling the battery – StorCase Technology Fibre-to-SCSI Single RAID User Manual

Page 112

100

Configuration

StorCase Technology, Inc.

S10C100 User's Guide - Rev. A01

Figure 67: Cache Lock Screen

Select the desired option and press Enter.

Configuring the Battery

This function allows the user to configure two (2) settings for the battery.

Enable/disable the battery (default is battery enabled).
Set the battery age/disable battery life monitor.

Enabling/Disabling the Battery

This function allows the user to run the controller without a battery. However, if there is no

battery in the controller, the controller's alarm will sound. To eliminate this alarm condition,

simply disable the battery (default is battery enabled).

NOTES: Disable the battery ONLY if the controller is hooked up to an Uninterruptable Power

Supply (UPS), so that loss of power is prevented.
Battery holds up to 72 Hours of back-up power.
Average time to recharge battery is 4 hours.
Average lifespan of a battery is 3 Years.