ADLINK ND-6067 - Manual (Page 214)

212
6.7.17 Set Minimum Input Signal Width at High Level
@Description
Set the minimum input signal width at high level, for signal level
high less then this value will be filtered out as noise.
@Syntax
$(Addr)0H(MinFData)
$ Command leading code.
(Addr) Address ID (2-character)
0H Set minimum input signal width at high level
command code.
(MinFData) The minimum width data at high level. The unit is
μs
and its resolution is 1
μs. This value range from 4 μs
to 1020
μs, which is a 4-digit integer. (4-character)
@Response
!(Addr)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: $300H0100
Response: !30
Item Meaning Description
$ (Leading Code) Command leading code.
30 (Addr) Address ID is 30H.
0H Set minimum input signal width.
0100 (MinFData) 100
μs
(6080)