ADLINK ND-6067 - Manual (Page 171)

169
6.4.6 20mA Calibration
@Description
Stores the current output value as 20 mA reference at the
specified analog output module. (only 6021)
@Syntax
$(Addr)1
$ Command leading code (1 character)
(Addr) Address ID (2 characters)
1 Function Code, 20 mA calibration (1 character)
@Response
!(Addr)
or
?(Addr)
! Command is valid.
? Command is invalid.
(Addr) Address ID.
@Example
User command: $061
Response: !06
To perform the 20 mA calibration for analog input module at address ID
06H.
Note : Analog output module should be trimmed to the correct
value by “Trim Calibration” command before to execute
“20 mA Calibration”. Refers to Chapter 9 “Analog Output
Calibration” for details .
(6021)