ADLINK ND-6067 User Manual
Page 169
167
The command sets the analog output to be 4 mA at address 08H, if the
data format is configured as % of FSR and 0~20mA output range.
4mA = 20mA x 20.00%
User command:
#097FF
Response:
>
The command sets the analog output to be 5 V at address 09H, if the
data format is configured as hexdecimal format and output range of
0~10V.
5 V = 7FF / FFF x 10V
User command:
#08A-05.000
Response:
>
The command sets the analog output port A to be –5 V at address 08H.