ADLINK ND-6067 - Manual (Page 146)

144
(DataFlag) Current setting of module setting and
RS-232 configuration refer to Table 6-4
for details. (4-character, WXYZ) 6531
@Example 1
User command: $302
Response: !30050600
! Command is valid.
30 Address ID.
05 Analog input range is
±2.5 V.
06 Baud rate is 9600 bps.
00 checksum is disable.
@Example 2
User command: $182
Response: !18320610
! Command is valid.
18 Address ID.
32 Analog output range is 0 to 10V
06 Baud rate is 9600 bps.
10
The output data is in engineering units, slew rate is 1mA/sec,
checksum is disable.
@Example 3
User command: $302
Response: !30400600
! Command is valid.
30 Address ID.
40 Digital I/O module.
06 Baud rate is 9600 bps.
00 checksum is disable.