Interlogix DVR 60 User Manual - Manual (Page 94)

11BChapter 12: Configuring alarm settings
88 TruVision DVR 60 User Manual
Figure 36: Mouse pop-up menu for motion detection mode
1. Full screen: Select the whole screen to be sensitive to motion detection.
2. Clear All: Clear all motion detection areas on-screen.
3. Sensitivity: Set the motion sensitivity level. There are five sensitivity levels: 0 (lowest) to 5 (highest).
4. Target size: Set the minimum number of zones in a camera image that must be activated simultaneously before it is
considered to be valid motion. The value can be between 0 and 255 squares.
5. Exit: Return to the Advanced Camera Settings screen.
For analog cameras you can set up both the schedule and areas sensitive to
motion detection for each camera individually or easily copy the settings of one
camera to other cameras.
For IP cameras you can configure from the DVR the schedule when the camera
can be triggered by motion. However, you need to configure the area of the video
display sensitive to motion from the camera itself.
Note: For motion detection to work best the light in a camera area should be
constant, and the background of the camera image should preferably be high-
contrast.
Description of alarm notification types
When setting up the alarm rules for motion detection, you can specify how you
want the DVR to notify you about an alarm. You can select more than one
notification type.