Interlogix DVR 60 User Manual - Manual (Page 100)

11BChapter 12: Configuring alarm settings
94 TruVision DVR 60 User Manual
4. Enter an alarm name for the selected output in the Alarm Name field.
5. Select an option in the Timeout box.
The timeout setting lets you define how much longer a signal remains active
even after the alarm has ended. If you select Manually Stop, the signal
remains active until it is manually acknowledged by pressing the alarm button
on the front panel or remote control (see “Triggering alarm outputs manually”
below).
6. Select a schedule for the alarm output. For example, if you only want the
alarm signal to be active during the working hours.
7. Copy these settings to other outputs, if required.
8. Select OK to save and exit.
Triggering alarm outputs manually
When an alarm is activated, the DVR can be set up so that the alarm must be
manually acknowledged in order to be silenced.
All user levels (administrator, manager and operator) can manually acknowledge
an alarm.
To trigger alarm outputs manually:
1. Enter the Manual Alarm screen by selecting
System
in the main menu. In the
System View screen, select
Alarm Out.
The Manual Alarm screen appears.
Select on of the following: