Interlogix DVR 60 User Manual - Manual (Page 49)

5BChapter 6: Configuring the live mode display
TruVision DVR 60 User Manual 43
Figure 19: Layout screen
Table 14: Description of the layout screen
Option Description
Main monitor Select which monitor will be the main monitor. Default is VGA, if connected.
Layout mode Select which multiscreen layout will be default in live mode.
Main dwell time Set the length of time for which a camera appears on-screen on the selected
monitor before moving to the next camera during sequencing. Default is off.
Display layout Set the camera order during sequencing. See “Sequencing cameras” on page
44 for more information.
Enable audio out Enable/disable audio output.
Spot monitor Select which monitor will be the spot monitor. Default is B monitor.
Spot dwell time Set the length of time for which a camera appears on-screen on the spot (B)
monitor before moving to the next camera during sequencing. Default is 10
seconds.
To set up the display options:
1. Enter the Display Settings screen by selecting
Display
in the main menu.
2. Click the Layout tab. The Layout screen appears. Modify the required
settings.
3. Click the
Apply
button to save the settings.
4. Click
OK
to return to the main menu.
Audio set up
You can hear audio from cameras in both live and playback mode. However, in
order to be able to hear audio in playback you must select the Enable Audio
option in the Display menu.
To enable audio output:
1. Enter the Display Settings screen by selecting Display in the main menu.
2. Click the Layout tab. The Layout screen appears.