Interlogix DVR 60 User Manual - Manual (Page 36)

3BChapter 4: Operating instructions
30 TruVision DVR 60 User Manual
To access the main menu:
1. Press the Menu button on the remote control or front panel or right-click the
mouse and select the Menu button. The main menu screen appears.
Press
Exit
in the main menu screen to return to live mode.
Navigating through a dialog screen
Use the mouse to select any option or button on the screen. You can also use
the joystick (Up, Down, Left, or Right) on the front panel to navigate through the
options and press Enter to select. Press Menu to return to configuration category
and icon.
Changes to screen settings can be entered in various ways as shown in Table 7
below.
Table 7: Types of control
Control Function Description
Edit box An edit box lets you type characters to set the
value of an option, such as a camera name. You
must be in edit mode before you can enter a value.
Click the box and a virtual keyboard will appear to
enter alphanumeric characters. See “Using the
virtual keyboard” below.
List box Provides more than two values for the option. Only
one of them can be selected. Click the scroll
arrows at the right-hand side of the box to scroll
through the possible values. Click an option to
then select it.
Check box Provides two values:  indicates enabled and a
blank box indicates disabled. Click the check box.
Button Executes the function displayed on the button.
Click the button.
Bar Lets you adjust the scale of a value. Click and
hold the cursor. Adjust its position left or right
along the bar.
Using the virtual keyboard
A keyboard will appear on-screen when you need to enter characters in a screen
option. Click a key to input that character.
Figure 12: The virtual keyboard