Interlogix DVR 60 User Manual - Manual (Page 150)

20BAppendix E: PTZ protocols
144 TruVision DVR 60 User Manual
TVR 60 mapping to the KTD-405 keypad
Table 24: TVR 60 mapping to the KTD-405 keypad
Task Keypad action Further information
 Menu mode
Call up or exit menu In live view, press esc .
Move through the menus Press and hold esc and then
press the arrow buttons.
Down , Up , Left ,
Right
Move between menu tabs Press or to switch
between menu tabs.
Navigate to a menu option Press and hold esc and then
press the arrow buttons.
Down , Up , Left ,
Right
Select a character or menu
option Press Enter ( ). Note . If you press esc before
pressing Enter , you quit the menu
without saving any changes. It is the
same as cancel.
Select the zone ID Press zone to connect the
keypad to the DVR.
 Live mode
Call up a single camera Press 0 to 9 and then press
Enter ( ).
Using the numeric buttons 0 to 9 ,
enter the number of the camera and
then press
Enter ( ).
Call up multiview screens Press view and then continue
to press button 5 to scroll
through the options available.
Sequence through cameras Press the seq button to scroll
through the cameras in full
screen.
Sequence through multiview
screens Press and hold esc and then
press the left/right arrow
buttons
Switch between monitor A and
monitor B Press the mon button and
button 1 to switch to monitor A.
Press the mon button and
button 2 to switch to monitor B.
To return to the previously selected
monitor, you must deselect the
current monitor by re-entering the
combination again. So to return to
monitor B, press
mon 1 to return to
monitor B, or press mon 2 to return
to monitor A,
Note : The keypad display will
always indicate monitor A even
when monitor B is selected.
Manually acknowledge an alarm Press Alarm .
 PTZ functions
Enter PTZ mode In live mode, press Enter ( ).
PTZ functions (Up, Down, Left,
Right, Zoom in, Zoom out) Move the joystick to move the
dome up, down, left and right
Press zoom+ and zoom- .
KTD-405U : Turn the knob on the
joystick to zoom in/zoom out.
KTD-405-2DU : Press the zoom+
and zoom- buttons.
Leave PTZ mode Press esc .