Interlogix DVR 60 User Manual - Manual (Page 106)

12BChapter 13: Configuring network settings
100 TruVision DVR 60 User Manual
• Subnet Mask: The subnet mask for your network so the DVR will be
recognized within the network.
• Gateway: The IP address of your network gateway so the DVR will be
recognized within the network. This is typically the IP address of your
router.
• Primary/Secondary DNS Server: The preferred and alternate Domain
Name System (DNS) Server to use with your DVR.
5. Click
OK
to save and exit the Network Settings menu.
Configuring the DDNS
If your DVR is set up to use PPPoE as its default network connection, you can
set up Dynamic DNS (DDNS) to be used in conjunction.
To set up DDNS:
1. Enter the Network Settings screen by selecting
Network
in the main menu.
2. Click the Advanced tab.
3. Click Setup next to DDNS to enter the DDNS screen.
4. Check the DDNS box to enable feature.
5. Select a DDNS Type.
You can select one of the following:
• PeanutHull: Enter the User Name and Password obtained from the
PeanutHull website.
• DynDNS: Enter the Server Address for DynDNS (i.e.
members.dyndns.org). In the DVR Domain Name field, enter the domain
obtained from the DynDNS Web site. Then enter the User Name and
Password registered in the DynDNS network.
6. Enter the Server Address and the DVR Domain Name.
7. Enter the User Name and Password.
8. Enter the password again to confirm.