Interlogix DVR 60 User Manual - Manual (Page 128)

15BChapter 16: Configuring the DVR settings
122 TruVision DVR 60 User Manual
• Network Log Search: Remotely view logs that are saved on the DVR.
• Network Configuration Parameters:
Remotely configure parameters,
restore parameters to factory defaults and import settings to as well as export
settings from DVR.
• Network Camera Management:
Remotely enable and disable analog
channels. Add and delete IP cameras.
• Network Serial Ports: Configure settings for the RS-232 port.
• Network Allocating Video Output: Configure settings for video output.
• Two-Way Audio:
Use two-way radio between the remote client and the DVR.
• Network Layout Alarm and Trigger Alarm Output:
Remotely alert or
control the relay output of the DVR. Alarm and notification settings must be
configured properly to upload to host.
• Network Advanced Management: Remotely manage hard disk drives
(initializing and setting properties for HDDs) as well as remotely update
system firmware and stop the relay output
• Network Shutdown:
Remotely shutdown the DVR.
The camera settings include:
• Network Live: Select and view live video over the network.
• Remote Record Starting:
Remotely start and stop manual recording on any
of the channels.
• Local Playback:
Locally play recorded files that are on the DVR.
• Remote Playback: Remotely play and download recorded files that are on
the DVR.
• Network PTZ Control: Remotely control PTZ dome cameras.
• Local Backup:
Locally back up recorded files from any of the channels.
Table 21: Fixed access privilege settings by user level
Privilege User level
Administrator Manager Operator Custom
Local settings:
Local Log Search X X

Local Configuration X

Local Camera Management X

Local Advanced Management X

Local Shutdown/Reboot X X

Network settings:
Network Log Search X X

Network Configuration Parameters X

Network Camera Management X
