Interlogix DVR 60 User Manual - Manual (Page 146)

20BAppendix E: PTZ protocols
140 TruVision DVR 60 User Manual
Figure 40: Keypad and DVR connections
I/O box
Rear panel of
TVR 60
Setting up the keypad to work with the
TVR 60
The keypad must be in zone mode to connect correctly with the TVR 60.
Further information on connecting and programming the KTD-405 keypad can be
found in the user manual.
To set the keypad in zone mode:
1. Log into the keypad using the Admin password. Hold down the Enter button
( ) until a beep sounds and then enter the following code: 1 4 7 6. Push
the seq button to confirm.
2. Scroll through the menus with the button until this menu appears:
3. Change Operating Mode to Zone by moving the joystick down.
4. Quit the menu by pressing the
seq
button. The display will show, for example: