Interlogix DVR 60 User Manual - Manual (Page 28)

2BChapter 3: Getting started
22 TruVision DVR 60 User Manual
Check both the “Enable Schedule” and “All Day” checkbox. This enables the
recording schedule. The DVR will record continuously all day for the whole
week.
Click OK to return to the Schedule tab. To copy the schedule to another
camera, select the camera or select “All” under Copy To and click the Copy
button.
Click OK and then Next . You are then asked if you want to enter the Network
Settings screen.
8. Network configuration:
Click
Enter
to open the Network Settings screen and define your network
settings such as the IP address, subnet mask and default gateway.
Click
OK
to return to the eZ Setup screen.
9. When all the required changes have been entered, click
Finish
to exit the
Setup Wizard. The TVR 60 is now ready to use.