Interlogix DVR 60 User Manual - Manual (Page 127)

15BChapter 16: Configuring the DVR settings
TruVision DVR 60 User Manual 121
Level refers to the user’s level of access and can be set using one of the
following predefined levels. These levels include privileges that are already
defined and cannot be changed from this menu.
• Operator
• Manager
• Custom
However, the Custom level lets you select the user’s access privileges. See
“Customizing a user’s access privileges” below for more information.
4. Enter the user’s MAC address to let the user access the DVR from that
particular MAC address.
5. Click OK to save your user.
Customizing a user’s access privileges
You can allocate customized access privileges to Custom users depending on
their needs. Some users, for example, may need to be able to configure more
than the fixed privilege settings for a user level allow. See Table 21 on page 122
for the list of fixed privileges:
Only an administrator can allocate access privileges to users.
There are three types of privilege settings: Local, Network, and Camera.
The local settings include:
• Local Log Search:
Search and view logs of the DVR.
• Local Configuration: Configure and restore parameters to factory defaults.
Can also introduce settings to or export settings from the DVR.
• Local Camera Management:
Enable and disable analog channels. Can also
add and delete IP cameras.
• Local Advanced Management:
Access HDD management (including the
initialization and changing the properties of a disk). Update system firmware
as well as to stop the relay output.
• Local Shutdown/Reboot:
Shutdown or reboot the DVR.
The network settings include: