Interlogix DVR 60 User Manual - Manual (Page 103)

11BChapter 12: Configuring alarm settings
TruVision DVR 60 User Manual 97
2. Select a camera to configure for video loss detection, and then click Setup .
3. Click the Advanced tab.
4. Check the
Video Loss
Detection box to enable feature.
5. Click Rules next to the Video Loss Detection box to enter the Rules screen.
6. Click the Notifications tab to define how you want your DVR to notify you of
video loss. For more information, see “Description of alarm notification types”
on page 88. Click
OK .
7. Click the Schedule tab.
8. Set the schedule of when you want video loss detection to be enabled.
Schedule can be set for all week or any day of the week with up to 8 time
periods per day.
9. Click the Apply button to finish.
10. Repeat above for other channels.
Detecting video tampering
Video tampering, such as moving a camera to a different position, can also be
detected and set to trigger an action on your DVR.
Both analog and IP cameras can be selected. However, not all IP cameras may
support this feature.
Note: It is strongly recommended not to configure for video tampering when
using PTZ dome cameras.