Setting a preset position – Interlogix DVR 60 User Manual User Manual
Page 56
6BChapter 7: Controlling a PTZ camera
50
TruVision DVR 60 User Manual
If the display was in multiscreen format, it changes to full screen format. See
Figure 23 below for a description of the PTZ control panel.
Figure 23: PTZ control panel
1.
Directional pad/auto-scan buttons: Controls the movements and directions of the PTZ. Center button is used to start
auto-pan by the PTZ dome camera.
2. Adjust
iris.
3. Adjust
focus.
4. Adjust
zoom.
5.
Centers the PTZ dome camera. This function is not supported on all PTZ dome cameras.
6.
Instant zoom in. This function is not supported on all PTZ cameras.
7.
Adjust speed of PTZ dome camera movement.
Setting a preset position
Use the Preset tab in the PTZ Control screen to select, set, and delete presets.
Figure 24: Preset selection and setup screen