Interlogix DVR 60 User Manual - Manual (Page 102)

11BChapter 12: Configuring alarm settings
96 TruVision DVR 60 User Manual
• Alarm Out: Trigger an alarm output when a notification is detected. An alarm
output can be configured by following the steps listed in “Setting up external
alarms” on page 92.
• Email Notification: Sends an e-mail when an alarm or notification is
detected. Sending an email can be configured by following the steps listed in
“Configuring e-mail settings” on page 103.
• Other Notification: Panel Alarm LED:
Triggers the alarm indicator bar on
the front panel to flash on and off when a notification or alarm is detected.
• Motion Alarm:
Triggers the alarm indicator bar on the front panel to flash on
and off when a motion alarm is detected. The Panel Alarm LED option must
also be checked.
To set up system notifications:
1. Enter the Notification screen by clicking
Alarms
in the main menu, and then
the Notification tab.
2. Select the notification event to configure under Notification Type box.
3. Select a notification type. See “Description of alarm notification types” on
page 88 for more information.
4. Click OK to save and exit the Notification menu.
Detecting video loss
Video may be lost if the video cable or camera develop a fault or are damaged.
You can set up your DVR to detect video loss and trigger a notification.
To setup video loss detection:
1. Enter Camera Management screen by selecting
Camera
in the main menu.