Interlogix DVR 60 User Manual - Manual (Page 136)

16BAppendix A: Troubleshooting
130 TruVision DVR 60 User Manual
Failure Possible reasons and actions to take
Why is there no video recorded
after setting the motion detection? If there is no recorded video after setting up for motion detection:
1. Check that the recording schedule is setup correctly. See “Defining
a recording schedule” on page 81.
2. Check that the motion detection area is configured correctly See
“Motion detection” on page 87.
3. Check that camera channels are being triggered for motion
detection. See “Motion detection” on page 87.
Why does the DVR not detect the
USB export device for exporting
recorded files? The DVR and USB device may not compatible. Check that the USB
drive is formatted FAT32.
The DVR is in live mode but the
main menu does not appear. The
DVR does not respond to the
mouse, front panel, remote or
keypad. Your DVR may be in auxiliary mode. This occurs when the A/B monitor
button has been pressed on the front panel. To return to the previous
mode of operation, press the A/B monitor button again.