Interlogix DVR 60 User Manual - Manual (Page 41)

4BChapter 5: Live mode
TruVision DVR 60 User Manual 35
Table 9: Description of the monitor functions
3 monitors connected 2 analog monitors connected
Output Description Output Description
A Monitor VGA.
This is the main monitor. All features
can be accessed.
A Monitor A.
This is the main monitor. All features can
be accessed.
B Monitor A.
All features except the DVR
configuration can be accessed from
this monitor.
B Monitor B.
All features except the DVR configuration
can be accessed from this monitor.
Default spot monitor. Alarm pop-ups
appear on this monitor.
C Monitor B.
Default spot monitor. Alarm pop-ups
appear on this monitor.
Note:
All monitors can be configured to display alarm pop-ups. See “Configuring
display options” on page 42.
To select a monitor:
1. On the front panel, press:
- 3 monitors connected: the A button to select monitor VGA or the B button
to select monitor A.
- 2 analog monitors connected: the A button to select monitor A or the B
button to select monitor B.
Pop-up menus for mouse operation
Many features of the live mode can be quickly accessed by placing the cursor on
a live image and clicking the right-button of the mouse (see Figure 14 below).
Figure 14: Live mode mouse pop-up menu for the main monitor
The list of features available depends on which monitor is active. See Table 10
on page 36.