Interlogix DVR 60 User Manual - Manual (Page 50)

5BChapter 6: Configuring the live mode display
44 TruVision DVR 60 User Manual
3. Enable/disable audio output
4. Click the
Apply
button to save the settings.
5. Click
OK
to return to the main menu.
Sequencing cameras
The cameras are sequenced in numeric order by default. You can change the
sequence order of the cameras for all monitors. However, if three monitors are
connected, monitor C sequencing cannot be started from the front panel.
You can switch the channel of a camera with that of another camera in the
system. This lets you, for example, have the images of camera 1 appear on
channel 10, and the images of camera 10 appear on channel 1. This feature is
useful when you want to watch the images from specific cameras next to each
other on-screen.
See Figure 20 below. Each cameo displays both the order of the camera in the
sequence and the camera number.
Figure 20: Camera layout and sequence screen
Multiscreen layout selection
Camera order in the sequence
Camera number selection
To set the camera sequencing:
1. Enter the Display Settings screen by selecting
Display
in the main menu.
2. Click the Layout tab. The Layout screen appears.
3. Select the desired monitor.
4. In the Display Layout option, click the
Setup
button. The Camera sequence
screen appears.
5. In the Layout Mode list box select the required multiscreen layout display.
6. Click the cameo of the camera whose order you want to change. The
selected cameo is highlighted green.
7. Click the scroll arrows alongside the camera number to move up or down the
list of camera numbers. Select a camera.