Interlogix DVR 60 User Manual User Manual
Page 88
10BChapter 11: Configuring recording settings
82
TruVision DVR 60 User Manual
To set up a recording schedule:
1. Enter the Record Settings screen by selecting
Record
in the main menu.
2. Select the Schedule tab to open the Schedule menu (see Figure 35 on page
3. Select a camera for which to edit the schedule.
4. Click
Edit
. The following screen is displayed.
5. Check
Enable Schedule
.
6. Select the day of the week for which you want to set up the schedule or select
All Week
to set up the schedule for the entire week.
You can define a schedule for each day of the week.
7. Set the start and end time for recording.
Define a time period by entering a start (left column) and end (right column)
time. You can schedule up to eight time periods. Click All Day to record all
day.
Note
:
Time periods defined cannot overlap.
8. Select a recording type.
This setting instructs the DVR to begin recording when an alarm is triggered.
The recording type can be based on time and triggered by motion detection
and/or an alarm.
9. Select a recording parameter.
Recording parameters include Scheduled or TimeLapse. If set to Scheduled,
the DVR records based on the schedule defined. If set to TimeLapse, the
DVR records continuously.
10. Click
OK
to finish configuration.
11. Repeat steps 3 to 9 for other cameras or copy the schedule settings from one
camera to another.
To copy the current schedule settings to another camera, select a camera
from the Copy To dropdown list, and then click
Copy
.
12. Click
OK
to finish and save the schedule settings.