Interlogix DVR 60 User Manual - Manual (Page 147)

20BAppendix E: Configuring the DVR settings
TruVision DVR 60 User Manual 141
5. To connect it to the DVR, press the zone button and enter the ID number of
the TVR 60. The default value is “1”.
6. To configure the DVR zone ID number, at the DVR enter the System View
screen by selecting
System
in the main menu. Under Zone ID, enter the zone
ID value. The default value is “1”.
Note
: The zone ID value must be identical for the DVR and keypad.
The TVR 60 is now connected to the KTD-405 keypad.
To configure the TVR 60 device address:
1. Click the
Display
in the main menu and select the Monitor tab
2. Click the Device address edit box and enter a numeric value. The default
address for the keypad is “1”. Click
Enter
TVR 60 and keypad functions
The KTD-405U acts as a DVR control keypad when connected to the TVR 60.
The keypad mimics many of the functions available from the front panel of the
TVR 60.
Unavailable TVR 60 functions
The following TVR 60 functions are unavailable when using the keypad to control
the TVR 60:
 Export video
 Eject CD/DVD
 Preset and shadow tour
 Select motion detection or tampering zones
 Archive records
 Capture video
If these functions are required, it is recommended to use a mouse in conjunction
with the keypad as all TVR 60 functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control
the TVR 60: