Interlogix DVR 60 User Manual - Manual (Page 119)

TruVision DVR 60 User Manual 113
Chapter 15
HDD management
Initializing HDDs
The TVR 60 is shipped with the in-built HDD already initialized. You can re-
initialize the HDD. However, all data on the HDD will be destroyed.
To initialize a HDD:
1. Enter the HDD Management screen by clicking
System
in the main menu,
and then
Hard Disk
.
2. Select the HDD to be initialized.
3. Click the Init button.
4. Click
OK
to begin initialization.
After the HDD has been initialized, the status of the HDD changes from
Abnormal to Normal.
Setting HDD groups
Your DVR can organize multiple HDDs into groups. Videos from specified
channels can be set to be recorded onto a particular HDD group.