Interlogix DVR 60 User Manual - Manual (Page 133)

15BChapter 16: Configuring the DVR settings
TruVision DVR 60 User Manual 127
Restoring default settings
To restore default factory settings to your DVR:
1. Enter the Default Settings menu by selecting
System
in the main menu, and
then
Factory Default
.
2. Click
OK
to restore factory defaults.
Note : Network information such as IP address, subnet mask and gateway are
not restored.
Viewing system information
To view system information:
1. Enter the Default Settings menu by selecting System in the main menu, and
then System Information .
2. Click
OK
to exit to the previous screen.
Viewing system logs
Many events of the DVR are logged into the system logs.
To access the system logs and search for these events:
1. Enter the Default Settings menu by selecting System in the main menu, and
then View Log .
2. Enter search parameters.
3. Click
Search
to begin search.
If logs matching the search criteria are found, they are displayed in a result
list.