Interlogix DVR 60 User Manual - Manual (Page 59)

6BChapter 7: Controlling a PTZ camera
TruVision DVR 60 User Manual 53
- Or -
Press the front panel joystick for Enter.
The PTZ control panel appears.
2. Click the Shadow Tour button on the PTZ control panel. The PTZ Control
screen appears with the Shadow Tour tab open.
3. Select the shadow tour number from the list displayed.
Note:
There is only one shadow tour.
4. To record a new shadow tour, click the Run Shadow button to start recording
of the movements of the PTZ. Use the PTZ control panel to move the camera.
The camera movements will be recorded until the
Stop Running
button is
clicked.
5. Click the OK button to save and return to PTZ mode.
Calling up a preset position
Presets are previously defined locations of a PTZ dome camera. It allows you to
quickly move the PTZ dome camera to a desired position. You must be in live
mode to call up presets.
Note : Only enabled presets can be called up and deleted.
To call up a preset using the mouse:
1. Enter PTZ mode by left-clicking the mouse on the desired camera image and
selecting the
PTZ
icon in the cameo shortcut menu. The PTZ control panel
appears.
2. Click the Preset button on the PTZ control panel. The PTZ Control screen
appears with the Preset tab open.
3. Select a preset number and click the Call button.
4. Click
OK
. The camera immediately moves to that preset position.
To call up a preset using the front panel:
1. Enter PTZ mode pressing the joystick for Enter on the front panel. The PTZ
control panel appears.
2. Click the
Preset
button on the front panel.
3. Enter a preprogrammed preset number. The camera immediately moves to
that preset position.