16 technical data, 1 technical data – EVCO EVCSR818P9EF User Manual
Page 89
EVCO S.p.A.
Vcolor 818
| Installer manual ver. 1.1 | Code 144VC818E114
page 89 of 94
16
TECHNICAL DATA
16.1
Technical data
Purpose of the device:
operating control device.
Construction of control:
electronic control device to be incorporated.
Box:
user interface
control module
self-extinguishing black.
open frame.
Dimensions:
user interface
control module
128.0 x 94.5 x 30.3 ± 0.4 mm
(5.039 x 3.720 x1.193 ± 0.015
in; L x H x P).
166.0 x 116.0 x 44.0 mm
(6.535 x 4.566 x 1.732 in;
L x H x D).
Mounting of control:
user interface
control module
back-panel, with threaded studs
or by panel (from the front),
with self-threading screws and
frame
on flat surface, with spacers.
Protection rating:
user interface
control module
IP40, IP65 when installed in
panel with gasket 1010VCOL00
(to be ordered separately)
IP00.
Connections:
user interface
control module
removable screw terminal board
(control module), A type USB
connector (USB port)
removable screw terminal board
(user interface, power supply,
inputs, outputs and RS-485
MODBUS port).
The maximum length of the analogue inputs, digital inputs and
analog output connection cables must be less than 10 m (32.808
ft).
The maximum length of the user interface-control module must be
less than 10 m (32.808 ft).
Temperature of use:
from 0 to 55 °C (from 32 to 131 °F).
Storage temperature:
from -10 to 70 °C (from 14 to 158 F).
Humidity for use:
from 10% to 90% relative humidity without condensate.
Pollution situation:
2.