EVCO EVCSR818P9EF - Manual (Page 16)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 16 of 94
3. Press and release the ON/STAND-BY key (1) and then press the highest interactive key on the left (2) to unlock
the keyboard.
4. Press and release the ON/STAND-BY (1) key.
If the duration of the power cut has been such to cause the clock error (“rtc” code), the real day and time will
have to be reset; see paragraph 11.1 “Setting the real day and time”.
5.3 Switching the device on/off
Operate as follows:
1. Make sure that the keyboard is not locked and that no procedure is in progress.
2. Press and release the ON/STAND-BY key.
5.4 The display
During the “stand-by” status the display show the real day and time.
During the “on” status, the device will display the real day and time and the temperature of the cabinet.