EVCO EVCSR818P9EF - Manual (Page 78)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 78 of 94
To make the upload of the programs operate as follows:
5. Make sure the device is in the “stand-by” status.
6. Insert an USB peripheral in the USB serial port; make sure the peripheral contains the text document by name
“recepits.bin” (see point 3).
7. Press and release the key (1) to select “UPLOAD PROGRAMS”, then press and release the SET key (2): it will
automatically be started the reading (from the peripheral) of the text document by name “receipts.bin”
(containing information about the programs); the reading procedure can take some seconds.
8. To the end of the download remove the USB peripheral from the USB port, it will display the following screen: