EVCO EVCSR818P9EF - Manual (Page 55)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 55 of 94
9.2 Display of information relative to the HACCP alarms
Operate as follows:
1. Make sure the device is in the "on" status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1), press and release the MENU key (2) and then press and release the key (3)
in order to select the “HACCP”.
4. Press and release the key SET (4) and then press and release the key (5) or the key (6) to select the alarm
(the greater the number that follows the alarm code, the older the alarm).
5. Press and release the key SET (4): the device will display the information relative to the alarm.
6. Press and release the key (5) or the key (6) to display the information of the previous alarm or the successive
alarm.
Operate as follows to exit the procedure:
7. Press and release the ESCAPE key or do not operate for 60 s.