EVCO EVCSR818P9EF - Manual (Page 18)

EVCO S.p.A. Vcolor 818 | Installer manual ver. 1.1 | Code 144VC818E114
page 18 of 94
5.5 Display of inputs and outputs status
Operate as follows:
1. Make sure that the instrument is in the “on” status.
2. Make sure that the keyboard is not locked and that no procedure is in progress.
3. Press and release the HOME key (1), press and release the MENU key (2) and then press and release the key
repeatedly (3) in order to select the “INTERNAL VALUES”.
4. Press and release the SET key (4) and then repeatedly press and release the key (5) or the key (6) to select
the input or the output.
Operate as follows to exit the procedure:
5. Press and release the ESCAPE key or do not operate for 60 s.