3 restoring the factory settings, 1 access to the procedure, 2 restoring the configuration parameters – EVCO EVCSR818P9EF User Manual
Page 60

EVCO S.p.A.
Vcolor 818
| Installer manual ver. 1.1 | Code 144VC818E114
page 60 of 94
11.3
Restoring the factory settings
11.3.1
Access to the procedure
Operate as follows:
1.
Make sure that the instrument is in the “stand-by” status.
2.
Make sure that the keyboard is not locked and that no procedure is in progress.
3.
Press and release the top right corner of the screen (1).
Note:
Prj692AA05, represents the identifier of the keyboard firmware
Prj689AA05, represents the identifier of the base station firmware for power
11.3.2
Restoring the configuration parameters
Operate as follows:
1.
Access to the; see paragraph 11.3.1 “Access to the procedure”.
2.
Repeatedly press and release the + key (1) to set “149” and then press and release the SET key (2).
Operate as follows to exit the procedure:
3.
Press and release the ESCAPE key or do not operate for 60 s.