Toshiba LF434 - Manual (Page 94)

TOSHIBA
,6F8,A07 7 0
*Note
Only in case of the converter For special specificaiion (refer to 7,3.3 “Converter for
Special specifications ’), read from M.2.17 loM.2.20,
The norinal converter dose not have these parameters, and these parameters do not appear
in ihe items selection sequence.
fi.2.17 Password
The converter for s]?ecial specifications have password that protects from caJibnUirtg and
changing part of parameter that influences measurement.
Proceed as follows to check or change the password.
■ To check the password:
Key operation Display example Description
SET
□ A4: PASSWORD
123
Press [SET] first to start the items selection
sequence and select A4: PASSWORD from among the
configuration items using [ ► ] and [ J keys Then
press [SET] again to display tiic current
passwordfl23).
SET
□
A4: PASSWORD Pressing [SET], the system returns to the items
selection sequence.
Note: in case of inputting wrong password in the password input mode
Key operation Display example Description
SEl’
□
A4: PASSWORD
***
Press [SET] first to start the items selection
sequence and select A4i PASSWORD fro in among the
configuration items using [ ► J and [
a ] keys Then
press [SET] again to display the + ,
SEE
□
A4; PASSWORD Pressing [SET], Ihe system returns to the items
lielection sequence.
-
93
-