Toshiba LF434 - Manual (Page 56)

TOSHIBA
6 F 8 A 0 7 7 0
■ To chfinge the indicating unit (1):
The tbilowing example t^hows how lo change the primary indicating unit from % to iril/s.
Key operation Display example Desciiption
SET
□ Bl: U N I T 1
%
Press [Sb'n first to start the items selection sequence
to select lih LiyiT 1 from among the configuration
items usirag [ ► ] and [
a ] keys Then press [SET]
again to display the current primary indicating unit
in this example).
□ 61: U N I T 1
%
Pressing [ ► j, the cursor appears.
A.
□ Bl: U N I T 1
m l B
Select “ml” as the first unit of primary indicating unit
by pressing [ ^ ] as many times as necessary. (Notel)
►
□
Bl: U N I T 1
i l _ B
Pressing [ ► ], the cursor moves to the second unil
(time unit) of primary indicating unit.
▲
□
Bf: U N I T 1
m l A
Select "‘s” as the second unit (lime unit) of primary
indicating unit by pressing [ ▲ ] as many times as
necessary. (Note 2)
SET
□
Bl: U N I T 1
n l / s
Pressing [SET|, the cursor disappears and the changed
display flickers. l*ress [SET] again to save Ihc unit,
SHI
□
Bl: U N I T 1 Pressing [SE'l ], the system returns to the item
selection sequence.
Notes;! ,The first unit (volumetric unils etc,) changes as shown below:
I------ ► ^ ]--------- ► ml------- -> (hbl)'
RANGE-^ COU^T^ (ft/s)^
Units in parentheses, such as "bbr, ‘‘gaf’ and “ft'" are shown only when the
meter size is selected in inches. 'J hey are not show'ii when the meter size is
selected in mm.
2. The second unit (time unit) changes as shown below:
-► / s — / m i n ------- ►/li --------- /(! ---------- ----------------
-
55
-