Toshiba LF434 - Manual (Page 67)

TOSHIBA
6 F8,AO 7 7 0
■ T q change the damping conijtiint;
The following example shows how to change ihe damping constant from 0,5 sec to 10 sec.
K e y operation Display example Description
SLl’
□
D1: DAMPING
00. 5 s
Press [SET] first to start the items selection se­
quence and select Dl: DAMPING from among the
configuration items using [ ► ] and [
a .
] keys,
Then press [SET] again to display the current
damping constant (0.5 s).
► D1: DAMPING
Pressing [ ► ] t thecursornppears.
ilf necessary, press [ ► ] to move the cursor to the
□
OQ. S s digit to be changed.)
D1: DAMPING
Change the value to "‘T’ by pressing [
a
], Then move
A n
10 5 s
[he cursor to another digit by pressing [ ► j and
10.0 s
change the value. In this example repeat this process
unlit the display shows '' 10.0 s."' {Note)
SRT
Pressing [SETji the cursor disappears and the
□ Dl: DAMPING changed display flickers. Press [SET] again to store
10.0 s this data.
SFT’
D1: DAMPING Pressing [SE'1% the system returns to the items se-
□
Jection sequence.
^
65
—