Toshiba LF434 - Manual (Page 116)

TOSHIBA
6 F 8 A 0 7 7 0
10,3 Multi-range Functions
MuUi-rfiiige functions can be set under the configuration item ‘GRANGE TYPE,” Refer to
H . 2 . 6 , '"Span (Range).*’ Four types of multi-range configurations are available as shown
below:
(1) Automatic selection of unidirecuonal flow' multi-range
(2) Aulomaiic selection of bidirectional flows multi-range
(3) Remote selection ol unidirectional flow multi-range with an external signal
(4) Remote selection of bidirectional flow's multi-range with an external signal
Proceed as follows to use the multi-range functions.
Range setting
Set as follows referring to S.2.5, “Span (Range)/
L Select “RANGE TYPE.^’
2. Set the span lor ranges 1 to 4,
3- Set the hysteresis value.
DO/DJ function setting
Set DOl and/or D02 (option) to use them as range outputs. Refer to H.2.9, “Digital
I/tr'
To select ranges whth a remote signal, use DI (option) as u remote signal. Refer to
8.2.9, “Digital PO“
- 1 1 5 -