Toshiba LF434 - Manual (Page 41)

TOSHIBA
6 F 8 A 0 7 7 0
7.3.2 Configuration Parameter Selection in Setting and Calibration Modes
Process as follows to select the desired items, to check or change the item setting value.
B Tu selects the desired item ;
Key o)>erntion Display example Description
10. 00 m/s
100.0 S¡
Measure value displays .(Me a suremento mode)
SFT □
Al; EX. CURR. l*ressing [Sti'fJj the system changes to the items
selection sequence. (Note)
And the cursor appears under alphabet (A).
▲
□
B1: UNITl
Change the alphabet to “B” by pre.ssing [ -^ ],
* If cursor is the number, the number is increased
by pressing [-^ ],
► □
Bl; UNITl
Then move the cursor to the number by pressing
[ ► 1
* If cursor is the number, Ihc cursor is
changed to the alphabet by pressing \ > ] .
□ □ C2; RANGE 1
Selects the desired item (indicated by an
alphabet letter and a number) first by selecting
the digit (alphabet or number) with [
> ] and
then changing the value w^lth [ ^ ].
The example shows “C2: RANGE 1
Note: In case of that the convrter is type for special specifications and serted password,
changing measurement mode lo items selection sequence, password-input mode appears.
Sec 7.5’Tassword Inpul'Tor details about Password-input mode
See 7.3.3 '^Converter for Special specifications'Tor to differentiate the converter for
special specifications and normal.
-
40