Dampin}; constant, Toshiba – Toshiba LF434 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TOSHIBA

. 6 F 8 A 0 7 7 0

Dampin}; Constant

The damping const an l is used to moderate output i1uct nations. (The larger the damping

constam> the more tiic output is averaged. But the response to an input change will be

slower.) The damping constant can be set as follows:

0.0 sec, 0.5 sec and 1 to 60 sec (in incremeots of 1 second)

Note: C.O see setting will ’i^'ork as equal to 0.1 see damping constant.

Setting value exceeding 60 sec will be automatically set to 60 see.

Proceed as follows to check or change the damping constant.

■ To check the dninping constant:

Key o]>cration Display example

DescriptioD

SF.T

□

Dl: DAMPING

OZ. 0 s

Press [SET] first to start the ileins selection se

quence and select Dl: DAMPING from among the
configuration items using [ > ] and [

] keys.

Then press [SLTj again to display the current

damping constant.

SET

□

Dl : DAMPING

Pressing [SET], the system returns to the items

selection sequence.