BUCHI PrepChrom C-700 - Manual (Page 77)

BÜCHI Labortechnik AG Operation | 6
PrepChrom C­700 77/110
u Select the tab Elution.
u Press the icon (1) to switch between the graphical and classical table.
u Press the gradient mode button (2) to choose between linear and step gra­
dient mode.
• Linear gradient mode
Note
The first step is used as a start point only and corresponds to the condition used
during equilibration (if activated). The time of the first step can not be modified.
u Adjust the flow rate (1)
Note
When using BUCHI column methods, the system sets the optimal flow rate for
the column (only flash columns).
u Adjust the percentage of the used solvents (2).
Note
Always start adjusting the solvent percentages from the right to the left.
u Add other steps (3).
u Set the end time for elution (4).