BUCHI PrepChrom C-700 - Manual (Page 51)

BÜCHI Labortechnik AG Installation | 5
PrepChrom C­700 51/110
u Activate/Deactivate Air Purge (3) if needed.
u Select the tab Detector.
u Click into the field (1) to find the right COM port.
u The wavelength range of the UV Detector is preset (2).
u Define the delay volume between the UV Detector and another connected
detector (3).
u Select the tab Collector.
u Click into the field (1) to find the right COM port.
u Define the dead volume between the UV Detector and collector (2).
u The collector X Origin and Y Origin (3) can only be adjusted in the rack
definition folder.
• 5.7.6 Needle, offset [ } page 62]
u The tube pattern and the rack pattern are preset but can be adjusted if
needed (4).
u The home position (horizontal X, vertical Y) of the fraction needle is preset
but can be adjusted if needed (5).