BUCHI PrepChrom C-700 - Manual (Page 55)

BÜCHI Labortechnik AG Installation | 5
PrepChrom C­700 55/110
Detector Lamp
Cooling Time Indicator Adjust the time of display of the dialog
box which give the lamp cooling time
after its switching off
Bottles
Bottles (max.) Give the maximum value admissible
for the capacities of solvents contain­
ers
Waste (max.) Give the maximum value admissible
for the capacity of Waste container
Tubes (max.) Give the maximum value admissible
for the capacities of collection tubes
Others
ICM Mode Timeout Adjust the period during which an
ended method continues with current
parameters to potentially detect a new
signal activity if this feature is activated
AGO Timeout Adjust the maximum period during
which the AGO feature (which holds
current gradient parameters when a
peak appears on the chromatogram)
stays active during the method execu­
tion if this feature is activated
Air Purge Volume Adjust the volume of air pumped at the
end of the method to dry spent
Columns if this feature is activated, the
time depends of the column currently
used
Purge Valve Confirmation Disable or enable a warning message
before purging
Column Ready Confirmation Not available
1/ this is for the use of the integrated
elsd you don’t have. To avoid over
pressure when the split valve is switch­
ing and no column present on the sys­
tem
Menus Display
Manual Method Enable or disable the creation/edition/
starting of manual methods
Step Method Enable or disable the creation/edition/
starting of step methods
Predefined Method Enable or disable the creation/edition/
starting of predefined methods
Numbered Method Enable or disable the creation/edition/
starting of numbered methods
Method File Enable or disable the creation/edition/
starting of method files
Sequence File Enable or disable the creation/edition/
starting of sequence files
Bottles Enable or disable the modification of
containers, volumes and names