BUCHI PrepChrom C-700 - Manual (Page 53)

BÜCHI Labortechnik AG Installation | 5
PrepChrom C­700 53/110
u Choose Global Signal or Separate Signal.
5.7.2 User profile
u Press Setup > User Profile on the main menu.
u Adjust the different settings in the menu according to personal require­
ments.
User Interface
Signal 1 Change the color of Signal 1 plot (= is­
sued of Detector Channel 1) and the
curve thickness
Signal 2 Change the color of Signal 2 plot (= is­
sued of Detector Channel 2) and the
curve thickness
Signal 3 Change the color of Signal 3 plot (= is­
sued of Detector Channel 3) and the
curve thickness
Signal 4 Change the color of Signal 4 plot (= is­
sued of Detector Channel 4) and the
curve thickness
Signal Ratio Change the color of Signal Ratio plot
(Ratio between Signal 1 & 2 & 3 & 4)
and the curve thickness
Eluent A Change the color attributed to A in the
software (bottle, curves report, ...) and
its curve thickness
Eluent B Change the color attributed to B in the
software (bottle, curves report, ...) and
its curve thickness
Eluent C Change the color attributed to C in the
software (bottle, curves report, ...) and
its curve thickness
Eluent D Change the color attributed to D in the
software (bottle, curves report, ...) and
its curve thickness