BUCHI PrepChrom C-700 - Manual (Page 54)

5 | Installation BÜCHI Labortechnik AG
54/110 PrepChrom C­700
Pressure Change the color of Pressure plot (= is­
sued of Pressure Transducer) and its
curve thickness
Flow Rate Change the color of Flow Rate plot (=
user setting) and the curve thickness
Tubes Change the color of collection Tubes
filled (repeated every 4 tubes) in Peak
Tracing and curves panel
Peaks Change the color of Peaks detected
(repeated every 4 peaks) in Peak Trac­
ing and curves panel
Time Lines Show or hide the vertical time lines
representing steps on the curves panel
Grid Show or hide the grid (horizontal and
vertical dotted lines) on the curves
panel
Keyboard Choose this configuration of the key­
board used in the software
Advanced Setting
Collection
Path Define the file to save the data and set­
tings.
Minimum Threshold Adjust the minimum value admissible
in the method edition
Maximum Threshold Adjust the maximum value admissible
in the method edition
Minimum Scale Adjust the min. scale possible of the
zoom in the curves panel
"Minimum Local" Slope Adjust the slope value used when
"Minimum Local" feature is activated
Rack Set Use Restart the collection of another
method from the first tube of the rack
set, or from the next free tube which
was not used in the previous method
Tubes Filling Above Threshold Choose the configuration of the key­
board used in the software. Choose if
the quantity collected in tubes is the
one given in the method, or the total
capacity of tubes used when the dec­
tector signal is above the current
threshold
Tubes Filling Below Threshold Choose if the quantity collected in
tubes is the one given in the method,
or the total capacity of tubes when the
detector signal is below the current
threshold
Detector Lamp
Countdown Before Switching Off Adjust the maximum time before auto­
matic switching off of the lamp at the
end of a method for which this feature
is activated