Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual - Manual (Page 36)

30 880 Technical/Service Manual
3.2.2 Setup Menu
SCALE FEATUR PORTS PFORMT SETPTS DIGIO ALGOUT VERS
AUDIT TARE SETPTS T & D ACCUM SETUP
Figure 3-7. Setup Menu Structure
SETUP Menu
Parameter Choices Description
SCALE GRADS
SPLIT
FORMAT
ZTRKBN
ZRANGE
MOTBAN
OVRLOA
SSTIME
DSPRAT
SMPRAT
DFSENS
DFTHRH
TAREFN
PWRUPM
ACCUM
THRESH
CALIB Configure and calibrate scale.
See Figure 3-8 for Scale menu structure.
See Figure 3-9 for Format menu structure.
See Figure 3-10 for Calibration menu structure.
FEATUR REGION
UID
CONSC#
PASSWD
KEYLCK
LOCALE
LATUDE
ELEVAT Feature – set miscellaneous system attributes.
See Figure 3-11 for Feature menu structure.
See Figure 3-12 for Region and Regulatory menu structure.
PORTS COM
USBCOM
ETHNET
USB
FLDBUS Configure Communication Ports.
See Figure 3-13 for PORTS menu structure.
See Figure 3-14 for COM menu structure.
See Figure 3-15 for ETHNET menu
PFORMT GFMT
NFMT
ACCFMT
SPFMT
HDRFMT Set print format used for header, gross, net, and setpoint ticket formats.
See Figure 3-17 for Print Format menu structure.
See Section 7.0 for detailed information on print formatting.
SETPTS SP CFG
BATCHG Configure setpoints and batching mode.
See Figure 3-18 for Setpoint menu structure.
See Figure 3-19 for Gross, Net and %Rel Setpoints.
See Figure 3-20 for Pause, Delay, WaitSS, Counter and Autojog Functions.
See Figure 3-21 for Timer and Concur Functions.
DIGIO SLOT 0 Assigns digital input/output functions. See Figure 3-22 for Digital I/O menu structure.
Table 3-4. Setup Menu Parameters