beautypg.com

14 display tare, Display tare – Rice Lake 880 Performance Series Indicator/Controller Technical/Service Manual User Manual

Page 15

background image

Introduction

9

5. Press

MENU

to return to the weigh mode.

Note

The PRINT key only performs one accumulation, and only if the weight is above the accumulator threshold.
Weight must return to below the accumulator threshold value before another accumulation is allowed.

Accumulator threshold is configured in the setup menu, see Section 3.2.3.

1.4.14 Display Tare

When a stored Tare value is displayed, the Gross and Net LEDs will be off and the

will be lit. To display a

stored tare:

1. Press

MENU

.

2. Press to

TARE

and press to view the current tare value.

3. Press

MENU

twice to return to weighing mode.

If there is no tare in the system, the value displayed will be zero and the Gross and Net LED will be turned off.
See Section 10.5 for more information pertaining to the regulatory mode of operation.

See also other documents in the category Rice Lake Scales: