Dell POWERVAULT MD3600I - Manual (Page 217)

The Download Physical Disk Firmware - Introduction window is displayed.
2. Click Next.
The Download Physical Disk Firmware - Add Package window is displayed.
3. In the Selected Packages area, click Add. Navigate to the location of the packages and click OK.
The selected package is added to the Packages to be transferred area.
4. Click Next.
The Download Physical Disk Firmware - Select Physical Disks window is displayed.
5. In the Compatible Physical Disks tab, select the appropriate physical disks or Select all the physical disks.
The Confirm Download dialog is displayed.
6. Type yes and click OK.
The Download Physical Disk Firmware - Progress window displays the progress of physical disk firmware
download.
7. After the firmware download is complete, click Close.
For more information, see the online help topics.
Downloading MD3060e Series Expansion Module EMM Firmware
NOTE: Do not make any configuration changes to the storage array while you are downloading the expansion
enclosure EMM firmware. Doing so could cause the firmware download to fail, damage the storage array, or cause
loss of data accessibility.
NOTE: Due to a limitation with Linux, expansion enclosure EMM firmware updates must be performed using out-of-
band management only. Failure to do so may result in the host server becoming unresponsive, and it may require a
reboot.
You can transfer a downloadable firmware file to the expansion enclosure EMM in the expansion enclosures attached
to the storage array.
CAUTION: Risk of possible loss of data or risk of damage to the storage array—Downloading the expansion
enclosure EMM firmware incorrectly could result in loss of data or damage to the storage array. Perform
downloads only under the guidance of your Technical Support representative.
CAUTION: Risk of making expansion enclosure EMM unusable—Do not make any configuration changes to the
storage array while downloading expansion enclosure EMM firmware. Doing so could cause the firmware
download to fail and make the selected expansion enclosure unusable.
1. In the AMW, selectUpgrade → EMM Firmware.
The Download Environmental (EMM) Card Firmware dialog is displayed.
2. In the Select enclosures area, either select each expansion enclosure to which you want to download firmware, or
select the Select All to select all of the expansion enclosures in the storage array.
Each selected expansion enclosure must have the same product ID.
3. Click Select File to select the EMM firmware file.
The Select Environmental (EMM) Card Firmware File dialog is displayed.
4. Select the file to download, and click OK.
5. Click Start.
6. Click Yes to continue with the firmware download.
NOTE: If you click Stop while a firmware download is in progress, the download-in-progress finishes before
the operation stops. The status for the remaining expansion enclosures changes to Canceled.
217