Acronis Access Advanced - Installation Guide User Manual

Page 78

a. You will be prompted to configure the SMTP settings used by the Access Server to send email

alerts and client enrollment invitations.

b. There is an option to send a test email to confirm these settings.

7. LDAP settings

a. The Acronis Access Server needs an LDAP connection to search your Active Directory for the

users and groups you would like to assign policies and data sources to.

b. Please enter the LDAP information for an Active Directory server on your network. If you

have a multi domain network this will need to be a Global Catalog Server on port 3268 or
3269 (for SSL connections). Tool tips are provided for each field for more detail.

c. You are required to configure an LDAP username and password to be used when the server

makes request to LDAP.

d. The LDAP settings you enter will be tested when you save them.

8. Local Gateway Server – Client connection address

a. Your mobilEcho Gateway Server has been automatically paired for administration by your

Acronis Access Server web console. This connection is made by IP address by default, and can
be modified later.

b. In this step, you will need to enter the network address that your mobilEcho clients use to

connect to this mobilEcho server. This is typically a DNS address and may be the DNS address
of this server, but could be the address of a proxy server used to gain access to this server.

9. Your initial configuration is now complete.

a. Click Finish Configuration to continue.