Acronis Access Advanced - Installation Guide User Manual

Page 131

131

2. Install Acronis Access on the second node, but this time use the default Postgres Data location

and the same postgres user password as for the first node.

3. Complete the installation.
4. Configure your Gateway Server's database to be on a location on a shared disk.

a. Navigate to C:\Program Files (x86)\GroupLogic\mobilEcho Server\
b. Find the database.yml file and open it with a text editor.
c. Find this line: database_path: './database/' and replace ./database/ with the path

you want to use (e.g. database_path: 'S:/mobilEcho_cluster/database/').

Note: Use slashes(/) as a path separator.

Note: You can copy the configured database.yml from the first node and paste it to the second node.

Note: The path should match the path set on the first node.

5. Move the cluster group to the second node. To do so, right-click on the cluster group and click on

Move Group.

6. Launch the Configuration Utility. On an upgrade from mobilEcho, this is generally located at

C:\Program Files (x86)\GroupLogic\Configuration Utility

7. Configure the Acronis Access Gateway Server service to listen on the IP address(es) for the

Acronis Access Service group.

8. Configure the Acronis Access Server service to listen on the IP address(es) for the Acronis Access

Service group.