Acronis Access Advanced - Installation Guide User Manual

Page 74

IMPORTANT NOTE: If you do not proceed with this configuration step, your mobilEcho server will not
be functional. This step is mandatory.

When exiting the installer, you will be prompted to run the Acronis Access Configuration Utility. Click
OK to continue.

If you accidently skip this step or need to change your network interfaces, ports, or certificates in the
future. You can manually run the configuration utility at any time.

On upgraded mobilEcho servers, the utility’s default location is:

C:\Program Files (x86)\Group Logic\Configuration Utility\AcronisAccessConfiguration.exe

12. Within the Configuration Utility, the Gateway Server tab is used to configure your Acronis Access

Gateway Server’s network address, port, and certificate. The Acronis Access Gateway Server is
the core mobilEcho service that your mobilEcho clients connect to and that gives access to your
file servers, NAS, and SharePoint servers. This service was called the mobilEcho File Access Server
prior to Acronis Access.

Note: You existing settings are retained. Please confirm that these settings match your existing
mobilEcho File Access Server settings. This service typically runs on all available network addresses on
port 443. If you have an existing SSL server identity certificate, it will be automatically selected. If you
do not, a self-signed certificate will be generated.